Acrylic paint question

  • Caelvan
  • Caelvan's Avatar
  • Platinum Member
  • Platinum Member
  • Blights will taste my sword. Those who corrupt Arawyn will pay with their lives
  • Posts: 2097
  • Thank Yous: 487
03 Feb 2012 22:35 #1 by Caelvan (Caelvan)
Acrylic paint question was created by Caelvan (Caelvan)
Hey guys so I'm painting my shield with acrylic paint. But it seems like it'll chip when I use it/ it gets hit. Any suggestions for keeping it on there/protecting it?
Caelvan Renaith
March Warden of Selandrias
[hr]
- - - - - - - - - - - - - - - - - - - - - - - -
Gal'Azin Merikh Tazam
Death's Will
[hr]
OOG:
Conor Peckham
-Marshal
The following user(s) said Thank You: Josephine (mferro54)
  • Josephine
  • Josephine's Avatar
  • Premium Member
  • Premium Member
  • You're welcome.
  • Posts: 257
  • Thank Yous: 64
04 Feb 2012 00:57 - 04 Feb 2012 00:58 #2 by Josephine (mferro54)
Replied by Josephine (mferro54) on topic Acrylic paint question
Try putting some kind of finish on it? I don't know what material you are using, but if it isn't foam you could probably find something clear you could spray on at the hardware store. I know spray paint can destroy certain kinds of foam.
IG: Josephine Weaveforger,
Carlotta OZ
OOG: Mary Bouchard (nee Ferro)
Last edit: 04 Feb 2012 00:58 by Josephine (mferro54).
  • Caelvan
  • Caelvan's Avatar
  • Platinum Member
  • Platinum Member
  • Blights will taste my sword. Those who corrupt Arawyn will pay with their lives
  • Posts: 2097
  • Thank Yous: 487
04 Feb 2012 03:11 #3 by Caelvan (Caelvan)
Replied by Caelvan (Caelvan) on topic Acrylic paint question
Its one of the shield's matt(rayven) makes.
Caelvan Renaith
March Warden of Selandrias
[hr]
- - - - - - - - - - - - - - - - - - - - - - - -
Gal'Azin Merikh Tazam
Death's Will
[hr]
OOG:
Conor Peckham
-Marshal
04 Feb 2012 03:15 #4 by Brunner Von Ritter (Martin Bridge)
Replied by Brunner Von Ritter (Martin Bridge) on topic Acrylic paint question
If it's polyutherene, then a simple coating of watered down PVA glue (elmers glue or White Glue to you guys) should do the trick. Then spray with fixative (matt varnish usually).
OOC Name - Martin Bridge
  • Matt D
  • Matt D's Avatar
  • Platinum Member
  • Platinum Member
  • Photographer extraordinaire!
  • Posts: 1998
  • Thank Yous: 557
04 Feb 2012 08:50 #5 by Matt D (MattD)
Replied by Matt D (MattD) on topic Acrylic paint question
Easist option is to simply use paint pens. They last longer without any kind of coating. But if you want, try clear packing tap to cover the design.
Elias Ashby
Proprietor of the Ashby Family General Store

Lord Templar Rayven Nightwing of the Order of Holy Light

(OOG - Matt D. - Photographer)
  • Josephine
  • Josephine's Avatar
  • Premium Member
  • Premium Member
  • You're welcome.
  • Posts: 257
  • Thank Yous: 64
04 Feb 2012 13:47 #6 by Josephine (mferro54)
Replied by Josephine (mferro54) on topic Acrylic paint question
Good idea!
IG: Josephine Weaveforger,
Carlotta OZ
OOG: Mary Bouchard (nee Ferro)
  • Tim P
  • Tim P's Avatar
  • Elite Member
  • Elite Member
  • Posts: 720
  • Thank Yous: 379
07 Feb 2012 05:10 #7 by Tim P (OrganicGolem)
Replied by Tim P (OrganicGolem) on topic Acrylic paint question
like with most things, primer (which could also be glue) + paint + sealer in that order always is your best bet
[hr]
-Tim P
The following user(s) said Thank You: Ming Na (Ming Na)
Moderators: Lois Heimdell (LoisMaxwell)
Time to create page: 0.482 seconds

Random Image

Random Quote

"Those who carry the Light as if it were a burden do it more disservice than those who carry the Darkness as if it were a torch."

~Mother Remi Sylvane

Search